Can You Use Flexvolt Battery On A 20V Tool?

FlexVolt Batteries are one of those heavy-duty batteries, that can automatically switch voltage when you change your tools. 20V/60V MAX FLEXVOLT Batteries power more than 200 products across the 60V MAX and 20V MAX systems. But the question is, can you use FlexVolt battery on a 20V tool?

Obviously, you can. These batteries are compatible with most of your DeWalt 20-volt max tools. And it also adds up to eight times the runtime.

In this article, I will discuss FlexVolt batteries and their tools. So, stay tuned.

Can you use a FlexVolt Battery on a 20V Tool?

Yes, A Dewalt FlexVolt battery pack will work in 20V Max, 60V Max, and 120V Max tools. When it comes to efficiency, the FLEXVOLT battery’s ability to automatically change between two voltages gives users a serious advantage.

It’s the battery that not only powers but improves the runtime of DeWalt 20V MAX tools. So, you don’t need to invest in a whole new system.

When the new FLEXVOLT 20V/60V MAX battery is inserted into a 20V MAX tool. The battery automatically changes into Parallel mode.

In parallel mode, the revolutionary FLEXVOLT 15-cell battery can deliver up to 4X the runtime which is pretty good for your current 20V MAX tools.

In this method, three sets of five cells each are connected in parallel to give you 20V MAX and 6 Amp-hour for improved runtime.

What Tools does Flex Volt Batteries Fit in?

All DEWALT 20-volt tools and chargers are compatible with standard DEWALT 20-volt batteries.

As a result, once you’ve signed up for the DEWALT platform, you’ll have access to over 100 items that all use the same battery technology.

DEWALT 20V MAX batteries, on the other hand, cannot be utilized in FlexVolt 60V and 120V MAX tools. The lower voltage is insufficient to power the high-demand motors.

Is Dewalt FlexVolt any Good?

Dewalt FlexVolt is everything a battery system can provide. Dewalt Flexvolt tools use a scheme that allows you to share batteries between tools. Even though some of the more powerful tools go beyond the standard 20v max.

However, when other cordless tools require 120 volts Dewalt’s new cordless tools require 60 volts.

The Flexvolt battery can be exchanged between these several tools, regardless of which of the 3 different voltages each tool necessitates.

Will the Battery Charge on my Existing Charger?

Yes, your existing 18V charger will work with the XR FLEXVOLT battery.

A XR FLEXVOLT fast charger will also be available, which will fully charge the 6AH XR FLEXVOLT battery in 60 minutes.

Can You Use a 60V DeWalt Battery on a 20V Tool?

Both Dewalt 60V Max and Dewalt 20V Max tools may use the DEWALT DCB606 20/60V MAX FLEXVOLT battery. Because it is a 6-amp hour battery, the 20/60V MAX FLEXVOLT is larger and heavier than regular 20V Max batteries.

Can You Use the FlexVolt Battery on XR Tools?

FlexVolt batteries from Dewalt are more adaptable than any other battery. The whole 18V XR product range, including chargers, is compatible with XR FLEXVOLT batteries.

The XR FLEXVOLT tools have a higher powerful motor that requires a 54V battery to operate. The DEWALT XR FLEXVOLT battery works with all DEWALT XR 18V cordless tools. You don’t require any new equipment.   

What’s the Difference Between 20V & 60V DeWalt Batteries?

It is dependent on the application. If you’re working in a heavy-duty environment, such as as a cut man on a home construction site, the 60V batteries can bear the strain.

They work less hard and operate cooler than 20V batteries when loaded. In addition, the voltage demand of the 60V varies depending on the tool. Essentially, a single battery pack may power many tools.

Can I Use my 20V Battery in my 60V Tool and Vice Versa?

No, is the quick response. Only 20V gadgets can use 20V batteries.

For example, you can’t use the battery pack from your 20V reciprocating saw in your 60V hammer drill.

A 60V pack, on the other hand, can be used in 20V, 60V, and 120V (60V x 2) tools, such as your brushless impact driver.

Should I Leave my Battery in the Charger When it is Finished Charging?

Remove your battery from the charger once it has finished charging to get the most life out of it.

Overcharging has the disadvantage of causing harm to the battery, which can reduce its lifespan and leave you stranded if it dies in the middle of a project.

Of course, examine the directions for your tool to see if storing your battery on the charger is acceptable.

Should I Remove the Battery from the Tool When I’m not Using it?

In general, the battery should have no effect unless the tool’s trigger is actuated. When not in use, it’s a good idea to keep the trigger locked, especially if it’s being stored in your work van and getting thrown around as you drive from site to site.

How Long Will a fully Charged 20V Battery Last?

It is debatable. The length of a charge and the battery’s life will be determined by a number of factors. User behavior, environmental temperatures, storage habits, and capacity are all issues to consider.

Do you toss it into the same toolbox where you keep your saws, hammers, and screwdrivers? It’s best to keep it in its original carrying case or padded bag.

 DeWalt offers a three-year warranty on their lithium-ion batteries. You may expect them to survive considerably longer if you take good care of them.

Does DeWalt make all of Their Tools in Every Voltage they Offer?

No, however, most tools come in both 18 and 20-volt versions.

An adapter is available from DeWalt that allows you to use a 20V battery in your 18V impact wrench.

It’s great to see them continue to expand their 20V line of cordless power tools. You may update when your reliable 15-year-old compact drill breaks down or gets phased out.

Bottom Line

Since 1924, DeWalt Power Tools has been at the forefront of product development and manufacturing for contractors, remodelers, and professional woodworkers. Dewalt 20 Volt MAX is the fastest system.

Do you know what happens, when you combine FlexVolt batteries with 20 volts of MAX tools?

You will get maximum runtime. Now, you must know the answer to your question, can you use FlexVolt battery on a 20V tool. Cause, Typical DEWALT, 20-volt batteries, are compatible with all 20-volt tools, as well as all 20-volt chargers.

Related Posts:

Leave a Comment

Your email address will not be published. Required fields are marked *